>

NETIOM Web Server - Elcosys

Electronic Control Systems
Go to content

NETIOM Web Server

Products > WEB remote controls
General description

This device is a sophisticated WEB SERVER with digital and analog I / O on an Ethernet and / or Internet network and in this second case it can be addressed via a standard ADSL connection or via a UMTS router, with connection always active and therefore the possibility of remote control and supervision at very low costs. Using a pair of these cards it is possible to create a link on an Ethernet network with the digital inputs of one card transmitted to the digital outputs of the other and vice versa. Furthermore, the data received from the serial port of a module is assembled in packets, transmitted over the network and received by the serial port of the second Netiom module.


Main features

  • 4 analog inputs
  • 16 digital inputs - otoisolated inputs optional card
  • 16 digital open collector outputs - optional relays card
  • RS232C serial port with programmable baud rate.
  • RJ45 for connection to the LAN network (10MIPS)
  • HTTP server with 32KB of WEB space.
  • The WEB space can be password protected.
  • Network client, connections triggered by events or timed.
  • Generate e-mails in response to specific events.
  • Watchdog mode: can be used to monitor the connection.
  • 10 MIPS Ethernet interface.
  • Work on a local network or the Internet
  • Automatic IP address detection (DHCP) or manual setting
  • Responds to the Ping command
  • All inputs and outputs available on terminal blocks


Technical data

  • Board size: 110 x 110 mm
  • Power supply: 12V d.c. at 50mA
  • Serial port with programmable baud rate from 2400 to 38400 baud (No Handshaking).
  • Ethernet 10 MIPS via RJ45 connector
  • Outputs (16) Open collector 50V d.c. at 50mA
  • Digital inputs (16) TTL / CMOS / dry contacts (10K ohm pull up).
  • Analog inputs (4) 10 bit resolution Max voltage 5Volts.
  • Digital inputs: terminal block or 10-pole IDC connector
  • Outputs: terminal block or 10-pole IDC connector.
  • Analog inputs: terminal block
  • Power supply: terminal block
  • RS232C serial port: DB9F
  • Ethernet: RJ45
  • Email options
  • Server and general parameters
  • Client Connections
  • Choice of the WEB page and download of the same

© ELCOSYS LTD 2021 - All rights reserved
Back to content